Split System Installation Malvern

Split System Install in Malvern

There’s nothing better than coming home to a 40-degree day, flipping on your split-system air conditioning and in a matter of minutes the house and family members are cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. However, like all heaters and coolers to make sure they’re running to their maximum they should be maintained and serviced in a professional manner by qualified experts. Gas Heating Melbourne offers experienced technicians who know split system air-conditioners from top to bottom. They specialise in all makes and models of these units and give you assurance that they will finish the job in a professional manner.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Malvern
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed for all sorts of tasks. If you’re looking for Split System Installation Malvern services then contact Local Heating and Cooling Professionals Malvern today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Systems for split air conditioners earn their name due to half the system (condenser) being outside the home, while the other half (fan coil) is located inside. When cooling, the warm air in the room is taken in through the fan coil and is then removed, which results in cool air recirculating back into the home. The reverse cycle permits the heat pump to run in reverse to provide heat during colder days.

The split system of air conditioning are placed in rooms, areas or multiple rooms linked by copper pipe to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be installed for more than nine rooms with only one outdoor unit and allowing for the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter months The annual operating cost is $272.34.

Reduced the Split System Operating Costs

It’s easy to lower your running expenses by using a Split System. Depending on the model that you purchase, and the star rating will determine just how much you’ll save per year. However looking beyond the initial cost to the way you utilize it Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to cool. Each degree less in summer will increase the running costs by 10%..
• Choose the economy option If your split system comes with one and regularly service your air cooling system.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close windows and doors to areas that are being cooled while the split system is operating.
• If the split system is shut off and the cooler outside, it is recommended to open the doors along with windows, allowing the cool air inside.
• Insulate your home to keep heat out in summer and in the winter months.
• Wear clothes that are appropriate for the weather.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most widely used residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and produces relatively less sound when it is utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC system are best affordable option for a one room apartment, small home or even a studio as they are comparatively inexpensive to purchase (depending on how many indoor units you need) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the area it is placed within, and each space may have different temperature.

Air Quality

Many AC splits include air filtering and humidity control features which control the amount dust and humidity in the space. This gives sensitive customers (children older, asthmatic, or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to a single outdoor condenser that in turn provides you with satisfaction of having the perfect cooling system (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Are split systems the same thing as one would expect from an air conditioner?

Sure, Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle but they are different in terms of installation.

How long will it take to install a split system air conditioner?

Generally speaking, a single AC split installation will take 3-6 hours. The exact length of time will depend on many factors such as below:

• Location and size of both indoor and outdoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In most situation the air conditioner is at least 10 years old and there are obvious issues with your AC There is a high chance that it could be more affordable to replace than repair.

In order to help you make the right decision, it is best to talk to the experts at ComfyHome to give you an honest opinion on the condition of your AC.

What size split system air conditioning will I require?

The standard measure ratio would be to multiply the size of the room by a factor of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a space of 40sqm, you should require a split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is perfect for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s required air conditioning can also be dependent on other factors such as the room insulation, size of the room, and’ locations.

To get an accurate estimate of the Split units size we recommend you call us for a more detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general an air conditioner is built to last from 10-20 years, on average. But this depends on a lot of factors such as the manufacturer of the air conditioner and the quality of the installation, the routine maintenance history and more…

It is important to service your Split System Air Conditioner on a regular basis to extend its life and increase effectiveness.

When should I wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks in order to boost the efficiency of the system, and ultimately reduce energy consumption by 5%-15 percentage.

Malvern Gas Heating Services

• Evaporative Cooling Repair Malvern
• Gas Space Heater Repair Malvern
• Gas Heating Service Malvern
• Gas Heating Installation Malvern
• Braemar Ducted Gas Heating Servicing & Repair Malvern
• Gas Heating Malvern
• Gas Hot Water System Installation & Repairs Malvern
• Ducted Gas Heating Servicing & Repair Malvern
• Brivis Ducted Gas Heating Servicing & Repair Malvern
• Carbon Monoxide Testing Malvern
• Gas Appliance Servicing & Repair Malvern
• Gas Heating Repairs Malvern
• Vulcan Ducted Gas Heating Servicing & Repair Malvern
• Gas Log Fire Service & Repairs Malvern
• Malvern

What Types of Systems We Service & Repair

Each brand and style of heating comes with its specific operation and maintenance needs; our experienced technicians are equipped with the expertise and experience to offer the best service to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance, specialising in all styles and models of heating systems. We take pride in a quick response time and commitment to quality, efficiency and reliability.

We are able to service and maintain the important brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Free Quote and No obligation

Our Promise To You

We at Gas Heating Melbourne we understand the discomfort of not having hot water, and it’s something we do not believe anyone should have to experience. This is why we put such a high priority for hot water emergencies. All of our plumbers are courteous and reliable, without a doubt we can assist you in all situations.

We take pride in our customer service , and it is our belief that even the small things count the most.

We take pride in our excellent customer service. here’s why our customers appreciate us:

• We always arrive when we say we will.
• Our experts will give you the number to call them when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always cleaning up after us.

We at Gas Heating Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If you have some questions about our services or what we can provide.