Split System Installation South Melbourne

Split System Installation in South Melbourne

There’s nothing better than arriving home on a hot day of 40 degrees and switching on your split system air conditioning, and in a matter of seconds, the house and your family is cool.

Split system air conditioning offers this versatility, making them hard to beat. But , just like all heaters or coolers to make sure they’re running at their best they should be maintained and serviced to the highest standard by qualified experts. Gas Heating Melbourne offers experienced technicians who know split system air conditioners in and out. They specialize in all models and models of these units offering you assurance that they will finish the job in a professional manner.

We provide a range of services that comprise the following:

• Split System Installation South Melbourne
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to perform all kinds of work. If you are looking for split system installation South Melbourne services then contact Local Heating and Cooling Professionals South Melbourne today and talk with one of our friendly team members.

How Do Split Systems Operate?

The split systems of air conditioning get their name due to half it (condenser) is located outside of the house while the other part (fan coil) is inside. While cooling, hot air that is inside the room is taken in by the fan coil and eliminated, resulting in cool air being recirculated back into the home. Reverse cycle allows the heat pump to operate in reverse, providing heating during colder days.

Split air conditioning systems are fitted to individual rooms, zones or rooms connected by copper piping to an outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted in at least nine rooms and only one outdoor unit and allow for individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the winter and summer periods, the annual running cost would be measured at $272.34.

Reducing split system Operating Costs

It’s not difficult to lower your running expenses with a Split System. Depending on the model that you purchase, and the star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost and how you use your Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer will increase your running costs by around 10%.
• Use the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the daytime. Close doors and windows to areas that are cooling when your split systems are running.
• When the split system is switched off and its cooler outside, you can open doors as well as windows in order to let cool air circulate.
• Insulate your home to keep the cool summer air out and keep the heat in during winter.
• Dress appropriately for the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are the most widely owned residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year because it maintains the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less noise when employed. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC models are most economical option for a single room, apartment or small house as they are comparatively inexpensive to buy (depending on the amount of indoor units you will require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated within, and each space is able to have various temperature.

Air Quality

A lot of split air conditioning systems have air filtering and humidity control functions that regulate the amount of dust and humidity in a room. This allows for sensitive customers (children, elderly, asthmatic or allergic people) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to a single outdoor condenser that in turn provides you with the comfort of having the perfect Air conditioner (in terms of physical and output constraints) for a specific room.

Split System FAQ

Is a split system the same thing as an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates with refrigerant and electricity under the same principal but very different in terms of how they are installed.

How long does it take to install a split system air conditioner?

In general, a single AC split installation will be completed in 3-6 hours. But, the exact amount of time may vary based on various factors like below:

• Dimensions and position of both indoor and outdoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority cases in the event that your air conditioner is more than 10 years of age and there are obvious issues with your AC, there is a good chance that it’s less expensive to replace it than to repair it.

For help in making the best decision, it is best to speak with the team at ComfyHome to get an honest assessment on the condition of your air conditioner.

What size of split system air conditioner will I require?

A standard measuring ratio will multiple the room area by a factor of 0.15 to get the needed power of the unit in Kilowatts.

For a space of 40sqm, you should require a split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for 10-20 square meter room areas.

However, the amount of the Split system’s air conditioning requirements can also be affected by other factors like the room insulation, quantity of residents and’ position.

For a precise assessment of the needed Split Unit size we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general air conditioners are built to last from 10-20 years in the average. But this depends on a lot of factors such as the manufacturer of the air conditioner as well as the quality of the installation, routine maintenance history etc…

It is important to service your split system air conditioner on a regular basis to extend its lifespan and improve effectiveness.

Do I need to clean the air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended that you clean your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5 to 15 percent.

South Melbourne Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Heating Installation South Melbourne
• Gas Heating Repairs South Melbourne
• Gas Heating Service South Melbourne
• Carbon Monoxide Testing South Melbourne
• Gas Heating South Melbourne
• South Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair South Melbourne
• Braemar Ducted Gas Heating Servicing & Repair South Melbourne
• Evaporative Cooling Repair South Melbourne
• Gas Log Fire Service & Repairs South Melbourne
• Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Space Heater Repair South Melbourne
• Gas Hot Water System Installation & Repairs South Melbourne
• Gas Appliance Servicing & Repair South Melbourne

What Types of Systems We Service & Repair

Each model and brand of heating comes with its specific operation and maintenance needs Our experienced technicians are equipped with the expertise and experience to offer the best service for all heating systems, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance that specialize in all kinds and brands of heating equipment. We pride ourselves on a quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain all leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

At Gas Heating Melbourne we understand the inconvenience of not having any hot water. This is something we do not believe anyone should have to experience. This is the reason we place the highest priority for hot water emergencies. Our plumbers are friendly and trustworthy, without a doubt we are able to assist you in any situation.

We are proud of our customer service and it is our conviction that the little things matter the most.

We pride ourselves on our excellent customer service. and here’s the reason our customers appreciate us:

• We always show up when tell you we will.
• Our experts will give you a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always taking care to clean up after ourselves.

At Gas Heating Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services and what we offer.