Split System Installation Eltham

Split System Install in Eltham

There’s nothing more satisfying than coming to your home on a hot 40 degree day flipping on your split-system air conditioning and in a matter of seconds, the house and your family is cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running to their maximum they must be maintained and serviced to a high standard by qualified experts. Gas Heating Melbourne offers experienced technicians who are familiar with split system air conditioners in and out. They specialize in all brands and models of these units giving you the confidence that we will complete the task to professional standards.

We provide a variety of services, which include the following:

• Split System Installation Eltham
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained for all sorts of work. If you’re looking for split system installation in Eltham services then contact Local Heating and Cooling Professionals Eltham today and talk with one of our friendly team members.

How Do Split Systems Function?

The split systems of air conditioning are their name due to half this system (condenser) being outside the home, while the other half (fan coil) is installed inside. When it cools, hot air that is inside the room is absorbed by the fan coil before being taken out, resulting into cool air being recirculated back into the house. While reverse cycle allows for that the heating system to run in reverse to provide heating during colder days.

Split air conditioning systems can be installed to specific rooms, areas or multiple rooms connected by copper piping with an outside unit (condenser). Multiple-headed split-air conditioning units can be set up for more than nine rooms and only one outdoor unit and allow for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter seasons, the annual running cost would be $272.34.

Reducing Split System Operating Costs

It’s not hard to cut down on your operating costs with a Split System. Depending on the model that you purchase, and it’s respective star rating will determine just how much you can save annually. It is important to look beyond the initial cost and how you make use of the Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower during summer will increase your running costs by approximately 10%..
• Choose the economy option in the event that your split system is equipped with one and regularly service your air conditioner.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the daytime. Close all doors and windows in areas being cooled when it is split running.
• When the split system has been switched off , and the cooler outside, you can open doors along with windows, allowing cool air circulate.
• Insulate your residence to prevent the cool summer air out and keep the heat in during winter.
• Dress to suit the weather.

Why Select Split Systems?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps a constant temperature, saves costs (less energy consumption) and produces relatively less sound when it is it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted Split AC system are most cost-effective option for a single room apartment, small home or even a studio as they are relatively cheap to buy (depending on the amount of indoor units you need) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is located within, and each space may have different temperature.

Air Quality

A lot of AC splits feature air filters and humidity control mechanisms that control the amount of dust and humidity inside a room. This allows for sensitive customers (children and elderly, asthmatic or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser that in turn provides you with satisfaction of having the best cooling system (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Is a split system the same thing as an air conditioner?

Sure, Split System is an air conditioning system. There are various kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate with refrigerant and electricity under the same principle but they are different in term of installation.

How long will it take to set up a split system air conditioner?

In general, a single split air conditioning system installation will take between 3-6 hours. The exact length of time could vary based on a variety of factors, such as below;

• Size and location of both outdoor and indoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of situations, if your A/C is more than 10-years-old and you have obvious issues with your AC, there is a good likelihood that it is more affordable to replace than repair.

For help in making the right choice for your needs, talk to the experts at ComfyHome to give you an honest opinion on the condition of your air conditioner.

What size of split system air conditioning will I require?

A typical measuring ratio will multiply the size of the room by a factor of 0.15 to calculate the necessary power of the unit in Kilowatts.

For a room with a size that is 40 sqm, you’ll require a split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is the ideal size for rooms with 10-20 square meters. spaces.

However, the amount of the Split system’s air conditioning requirements will also be affected by other factors like the insulation in the room, the size of the room, and’ place of residence.

For an accurate assessment of the Split dimension, please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on an average. However, this is contingent upon a myriad of factors such as the model of the AC, quality of the installation, regular service history, etc…

It is crucial to maintain Your Split System AC frequently to extend its life and increase efficiency.

When should I clean my air conditioner air filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of your system and possibly decrease your energy use by 5 to 15 percent.

Eltham Gas Heating Services

• Eltham
• Brivis Ducted Gas Heating Servicing & Repair Eltham
• Gas Heating Repairs Eltham
• Gas Heating Service Eltham
• Gas Heating Eltham
• Braemar Ducted Gas Heating Servicing & Repair Eltham
• Gas Log Fire Service & Repairs Eltham
• Gas Hot Water System Installation & Repairs Eltham
• Evaporative Cooling Repair Eltham
• Gas Heating Installation Eltham
• Vulcan Ducted Gas Heating Servicing & Repair Eltham
• Gas Space Heater Repair Eltham
• Carbon Monoxide Testing Eltham
• Gas Appliance Servicing & Repair Eltham
• Ducted Gas Heating Servicing & Repair Eltham

What Types of Systems We Service & Repair

Each brand and style of heating comes with its own operation and maintenance Our skilled technicians have the insight and experience to offer the best service to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance and specialize in all types and models of heating systems. We pride ourselves on having a fast response time and dedication to efficiency, excellence and reliability.

We can service and maintain the leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No obligation

Our Promise To You

We at Gas Heating Melbourne we understand the difficulty of not having hot water. It’s a situation we don’t think anyone should have to experience. That’s why we give such a high priority on emergencies with hot water. All of our plumbers are reliable and friendly We can assist with any emergency.

We are proud of our customer service , and it is our conviction that the little things matter the most.

We are proud of our exceptional customer service. Here’s why our clients are so happy with us:

• We always show up when say we will.
• Our experts will give you an appointment when they are 30 minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always taking care to clean up after us.

At Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical, and heating. If you have any questions regarding our services or what we can provide.