Split System Installation Edithvale

Split System Installation in Edithvale

There’s nothing better than coming home from a scorching day and turning on your split system air conditioning and in just a couple of minutes the house and your family will be cool.

Split system air-conditioning provides this flexibility, which makes them difficult to beat. But like all heaters and coolers that are required to run at their best, they need to be serviced and maintained to the highest standard by experienced professionals. Gas Heating Melbourne offers experienced technicians that know your split system air-conditioners both inside and outside. They specialize in all brands and models providing you with assurance that we will finish the job at a professional level.

We provide a range of services that include the following:

• Split System Installation Edithvale
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to complete all types of tasks. If you’re searching for Split System Installation Edithvale services then contact Local Heating and Cooling Professionals Edithvale today and talk with one of our helpful team members.

How Do Split Systems Operate?

Air conditioning splits earn their name due to half the system (condenser) being outside the home, while the other half (fan coil) is inside. When cooling, the hot air that is inside the room is absorbed from the fan coil and eliminated, resulting in cool air being recirculated back into the home. Reverse cycle allows the heat pump to run in reverse to provide heat during colder days.

Systems for split air conditioners are installed to specific rooms, areas or even multiple rooms connected by copper piping to an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for up to nine rooms and only one outdoor unit, and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the winter and summer periods The annual running expense is $272.34.

Lowering the Split System Operating Costs

It doesn’t take much to reduce your running costs by using a Split System. Depending on the model that you purchaseand its star rating, you will be able to determine how much you can save annually. However looking beyond the initial cost to how you make use of the Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Any degree lower than that will increase the running costs by 10%..
• Use the economy setting if your split system has one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close windows and doors to areas being cooled when it is split on.
• If the split system is shut off and the cooler outside, open the doors along with windows, allowing the cool air inside.
• Insulate your home to keep the summer heat out and the cold in the winter months.
• Dress appropriately for the weather.

Why Select Split Systems?

The wall mounted air conditioning system is the most frequently used residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout all seasons since it ensures a constant temperature, saves costs (less energy use) and produces a lesser amount of sound when it is utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC system are best budget option for a small room or apartment as they are comparatively inexpensive to buy (depending on how many indoor units you require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, so each room can have a different temperatures.

Air Quality

A lot of HVAC systems that are split come with air filtering and humidity control functions that regulate the amount of dust and humidity that can be found in the space. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser, which gives you the convenience of having the most suitable air conditioner (in terms of output and physical limitations) to a specific space.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Sure, Split System has an air-conditioning system. There are various types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle, but are different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

In general, a single AC split installation should last between 3 and 6 hours. The exact length of time will depend upon a number of variables, including the following:

• Size and location of both outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In the majority cases when your air conditioner is more than 10 years and you have obvious issues with your AC there’s a good chance that it could be cheaper to replace rather than fix.

To help you make the right decision, it is best to speak with the team at ComfyHome for an honest and accurate assessment of the state of your air conditioner.

What size of split system air conditioning will I require?

A common measure ratio would be to multiple the size of the room by a ratio of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a space of 40 square meters, you will need a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is ideal for 10 -20 sqm room spaces.

The size of the Split system’s air conditioning can be affected by other variables such as the insulation of the room, the amount of people residing there and’ place of residence.

To make an accurate determination of the needed Split units size we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general the air conditioner is constructed to last for 10-20 years, on average. But this depends on a lot of variables, including the brand of the A/C and the quality of the installation, regular service history, etc…

It is crucial to maintain your split system air conditioner often to prolong lifetime and enhance efficiency.

Do I need to clean my air conditioner air filter?

According to Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce energy consumption by 5 to 15 percent.

Edithvale Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Edithvale
• Gas Hot Water System Installation & Repairs Edithvale
• Edithvale
• Gas Heating Service Edithvale
• Evaporative Cooling Repair Edithvale
• Gas Log Fire Service & Repairs Edithvale
• Vulcan Ducted Gas Heating Servicing & Repair Edithvale
• Gas Heating Installation Edithvale
• Gas Space Heater Repair Edithvale
• Braemar Ducted Gas Heating Servicing & Repair Edithvale
• Gas Heating Repairs Edithvale
• Gas Appliance Servicing & Repair Edithvale
• Ducted Gas Heating Servicing & Repair Edithvale
• Gas Heating Edithvale
• Carbon Monoxide Testing Edithvale

What Types of Systems We Service & Repair

Every brand and type of heating system has its individual operation and maintenance requirements Our skilled technicians are knowledgeable and experience to offer excellent services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance that specialize in all kinds and brands of heating systems. We take pride in a rapid response time as well as a commitment to quality, efficiency and reliability.

We service and maintain all major brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Costs

Our Promise To You

At Gas Heating Melbourne we understand the frustration of not having hot water. It’s a situation that we would never want anyone to suffer through. That’s why we give an emphasis on emergencies with hot water. All of our experienced plumbers are friendly and trustworthy Without a doubt, we will be able to help with any emergency.

We are proud of our service to customers and it is our belief that the small things count the most.

We pride ourselves on our outstanding customer service. this is why our customers are so happy with us:

• We always show up when we say we will.
• Our techs will give you a their number when they’re thirty minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always taking care to clean up after our own mess.

At Gas Heating Melbourne offer emergency and maintenance services for plumbing, heating, and electrical. If you are unsure about our services and what we provide, we are here to help.