Split System Installation Chelsea Heights

Split System Installation in Chelsea Heights

There’s nothing better than arriving to your home on a hot day of 40 degrees and activating your split system air conditioning and in just a couple of minutes , your home and your family will be cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to keep them running at their peak they must be maintained and maintained to a high standard by qualified experts. Gas Heating Melbourne offers experienced technicians that know your split system air conditioners in and out. They are experts in all makes and models of these units and give you peace of mind that we can get the job done to a professional standard.

We provide a range of services that include the following:

• Split System Installation Chelsea Heights
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and fully trained to complete all types of tasks. If you’re in search of split system installation in Chelsea Heights services then contact Local Heating and Cooling Professionals Chelsea Heights today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

The split systems of air conditioning earn their name because of half it (condenser) being located outside the house , while the other part (fan coil) is located inside. When cooling, the warm air in the room is absorbed through the fan coil, and then is then removed, which results in cool air flowing back into the home. In reverse mode, it allows the heat pump to run in reverse to provide heat during cold days.

Split air conditioning systems are installed in individual rooms, areas , or rooms linked by copper pipe connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units can be installed for at least nine rooms with only one outdoor unit, and allowing for the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter time The annual running expense would be measured at $272.34.

The reduction of Costs of Split Systems Operating Costs

It’s not hard to reduce your running costs with the Split System. Depending on the model that you buy, as well as its star rating, you will be able to determine how much you’ll save per year. It is important to look beyond the initial price to how you use the Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C to cool. Each degree less in summer will increase your running costs by around 10%.
• Make use of the economy setting If your split system comes with one. Also, you should regularly check the condition of your air conditioning.
• Keep the sun’s heat out by closing the curtains and exterior blinds during the day. Close windows and doors to areas that are being cooled while you have the split unit operating.
• When the split system has been switched off , and the cooler outside, open doors as well as windows in order to let cool air inside.
• Insulate your house to block heat out in summer and inside in winter.
• Dress to suit the weather.

Why Select A Split System?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps a constant temperature, saves costs (less consumption of energy) and produces a lesser amount of noise when used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC models are most budget option for a small room, apartment or small house because they are relatively inexpensive to buy (depending on how many indoor units you require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located in, which means that each room could have various temperature.

Air Quality

Many HVAC systems that are split feature air filtering and humidity control functions which control the amount dust and humidity that can be found in the space. This allows for sensitive customers (children and elderly, asthmatic or allergic people) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser which in turn gives you satisfaction of having the most suitable cooling system (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Is a split system the same as one would expect from an air conditioner?

Sure, Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates with refrigerant and electricity under the same principle but they are different in terms of how they are installed.

How long will it take to install a split system air conditioner?

In general the typical AC split installation should last between 3 and 6 hours. The exact length of time may vary based on various factors like below;

• Dimensions and position of both indoor and outdoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of cases the air conditioner is more than 10 years of age and has obvious issues with your AC there’s a great chance that it could be cheaper to replace rather than fix.

To assist you in making the right choice for your needs, talk to the experts at ComfyHome to provide you with an honest and accurate assessment of the condition of your AC.

What size of split system air conditioning do I need?

A typical measuring ratio will multiply the area of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

If you have a room size of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is the ideal size for 10-20 square meter room spaces.

However, the size of the Split system’s air conditioning requirements can be affected by other factors like the insulation in the room, the amount of people residing there and’ location.

For an accurate assessment of the Split unit size, please contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years in the an average. But it depends on heaps of variables, including the manufacturer of the air conditioner as well as the quality of the installation, routine maintenance history and more…

It is essential to service your split system air conditioner frequently to prolong lifetime and enhance effectiveness.

What is the best frequency to clean the air conditioner’s air filter?

According to Daikin Australia, it is highly recommended that you cleanse your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy usage by 5%-15%.

Chelsea Heights Gas Heating Services

• Gas Heating Service Chelsea Heights
• Gas Heating Repairs Chelsea Heights
• Chelsea Heights
• Gas Heating Installation Chelsea Heights
• Brivis Ducted Gas Heating Servicing & Repair Chelsea Heights
• Gas Appliance Servicing & Repair Chelsea Heights
• Evaporative Cooling Repair Chelsea Heights
• Carbon Monoxide Testing Chelsea Heights
• Gas Heating Chelsea Heights
• Gas Log Fire Service & Repairs Chelsea Heights
• Gas Hot Water System Installation & Repairs Chelsea Heights
• Ducted Gas Heating Servicing & Repair Chelsea Heights
• Braemar Ducted Gas Heating Servicing & Repair Chelsea Heights
• Vulcan Ducted Gas Heating Servicing & Repair Chelsea Heights
• Gas Space Heater Repair Chelsea Heights

What Types of Systems We Service & Repair

Every brand and type of heating requires its specific operation and maintenance needs; our experienced technicians are knowledgeable and experience to offer excellent services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems, specialising in all styles and types of heating systems. We pride ourselves on having a quick response time and commitment to efficiency, excellence and reliability.

We service and maintain all major brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Costs

Our Promise To You

At Gas Heating Melbourne we understand the frustration of not having hot water, and it’s something we believe no one should suffer through. This is the reason we place such a high priority on hot water emergencies. All of our plumbers are courteous and reliable We are able to assist you in all situations.

We take pride in our service to customers and it is our belief that the small things count the most.

We take pride in our excellent customer service. Here’s why our clients appreciate us:

• We always show up when tell you we will.
• Our techs will give you a the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always getting our hands clean after ourselves.

Our company Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have any questions regarding our services and the products we can provide.