Split System Installation Belgrave South

Split System Install in Belgrave South

There’s nothing better than coming home on a hot 40 degree day activating your split system air conditioning and in a matter of minutes your house and your family will be cool.

Split system air-conditioning provides this flexibility, which makes them difficult to beat. But like all heaters and coolers to keep them running optimally they must be maintained and serviced to the highest standard by experienced professionals. Gas Heating Melbourne offers experienced technicians who know split system air-conditioners from top to bottom. They specialize in all brands and models and give you assurance that they will finish the job at a professional level.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Belgrave South
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to perform all kinds of tasks. If you are looking for [keywords lower] Belgrave South services then contact Local Heating and Cooling Professionals Belgrave South today and talk with one of our friendly team members.

How Do Split Systems Work?

Air conditioning splits have their name because of half the system (condenser) being located outside the home, while the other part (fan coil) is located inside. In cooling, warm air from inside the room is absorbed by the fan coil, and then removed, resulting in cool air flowing back into the house. In reverse mode, it allows your heat pump operate in reverse in order to provide warmth during cold days.

Air conditioning split systems are placed in rooms, areas or even multiple rooms that are connected via copper pipes to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be set up in more than nine rooms using only one outdoor unit, and allow for individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of our recommended brands for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the winter and summer periods and the annual running costs is $272.34.

Reducing Split System Running Costs

It’s easy to cut down on your operating costs with the Split System. Depending on the model that you purchase, and the star rating will determine how much you can save annually. Beyond the initial cost and how you use the Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C for cooling. Every degree lower in summer will raise the cost of running by approximately 10%..
• Choose the economy option if your split system has one. You should also regularly maintain your air cooling system.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds in the morning. Close the doors and windows of areas being cooled when your split systems are operating.
• If the split system is shut off and the cooler outside, open doors along with windows, allowing cool air flow in.
• Insulate your property to help keep summer heat out and the cold inside in winter.
• Dress to suit the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most widely used air conditioning systems for homes because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains the temperature constant, cuts costs (less energy use) and produces relatively less sound when it is it is used. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall-mounted divided AC units are your best cost-effective option for a single room apartment, small home or even a studio since they are inexpensive to buy (depending on the amount of indoor units you need) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is located in, thus each room can have a various temperature.

Air Quality

A lot of AC splits come with air filtering functions and humidity control which control the amount dust and humidity within a room. This gives sensitive customers (children, elderly, asthmatic or allergic consumers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser which provides the comfort of having the perfect Air conditioner (in terms of output and physical constraints) to a specific space.

Split System FAQ

Is a split system similar to one would expect from an air conditioner?

It is true that Split System is an air conditioning system. But, the different kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates using refrigerant and electricity, based on the same principle, but are different in term of installation.

How long will it take to set up a split system air conditioner?

In general the typical split system air conditioning installation should take 3-6 hours. The exact length of time can vary based upon a number of variables, including below;

• Dimensions and position of both indoor and outdoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation in the event that your air conditioner is more than 10 years of age and there are noticeable issues with your A/C there’s a great likelihood that it is cheaper to replace rather than fix.

In order to help you make the best decision It is recommended to talk to the experts at ComfyHome for an honest assessment on the condition of your AC.

What size of split system air conditioner will I require?

A common measurements ratio is multiple the area of the room by a factor of 0.15 to obtain the required power of the unit in Kilowatts.

For a room with a size of 40 square meters, you will need a Split air conditioning system of 6 kW. An air conditioning unit of 2.5kW is the ideal size for 10-20 square meter room areas.

However, the amount of the Split system’s required air conditioning can also be affected by other variables such as how well the insulation is in place, the amount of people residing there and’ locations.

For an accurate assessment of the needed Split units size please contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general the air conditioner is built to last 10-20 years, on an average. However, this is contingent upon a myriad of factors such as the brand of the A/C it is installed on, the quality of its installation, routine service history and so on…

It is important to service your Split System Air Conditioner frequently for a longer life span and to increase efficiency.

Do I need to wash my air conditioner air filter?

Based on Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5 to 15 15%.

Belgrave South Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Log Fire Service & Repairs Belgrave South
• Gas Heating Repairs Belgrave South
• Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Appliance Servicing & Repair Belgrave South
• Gas Space Heater Repair Belgrave South
• Evaporative Cooling Repair Belgrave South
• Braemar Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Heating Service Belgrave South
• Gas Heating Installation Belgrave South
• Gas Hot Water System Installation & Repairs Belgrave South
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave South
• Belgrave South
• Carbon Monoxide Testing Belgrave South
• Gas Heating Belgrave South

What Types of Systems We Service & Repair

Each model and brand of heating has it’s own operation and maintenance Our experienced technicians are equipped with the expertise and expertise to provide excellent services on all types of heating equipment, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance and specialize in all types and brands of heating equipment. We pride ourselves on having a quick response time and commitment to quality, efficiency and reliability.

We can service and maintain all leading brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Request a Quote with No obligation

Our Promise To You

At Gas Heating Melbourne we understand the discomfort of not having hot water. It’s a situation we believe no one should be forced to endure. This is the reason we place an emphasis on emergencies involving hot water. All of our plumbers are reliable and friendly, without a doubt we are able to assist you in any situation.

We take pride in the quality of our customer service. It is our conviction that the little things matter the most.

We pride ourselves on our exceptional customer service. this is why our customers are so happy with us:

• We always arrive when we promise to be there.
• Our techs will give you a the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always making sure we clean up after us.

The staff at Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have questions about our services and the products we offer.