Split System Installation Aspendale

Split System Install in Aspendale

There’s nothing better than arriving home to a 40-degree day, switching on your split system air-conditioning and within a matter of seconds, the house and family members are cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running optimally they must be checked and maintained in a professional manner by skilled professionals. Gas Heating Melbourne offers experienced technicians who know your split system air-conditioners in and out. They specialize in all brands and models of these units and give you confidence that we are able to complete the task at a professional level.

We provide a range of services, which include the following:

• Split System Installation Aspendale
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified for all sorts of work. If you’re looking for Split System Installation Aspendale services then contact Local Heating and Cooling Professionals Aspendale today and talk with one of our helpful team members.

How Do Split Systems Function?

The split systems of air conditioning have their name due to half the system (condenser) being outside the house , while the other portion (fan coil) is installed inside. In cooling, warm air inside the room is drawn in from the fan coil and is then removed, which results in cooling air returning to the house. In reverse mode, it allows your heat pump run in reverse, providing heating during colder days.

Systems for split air conditioners can be fitted to individual rooms, areas or multiple rooms linked by copper pipe connecting to the outdoor unit (condenser). Split air conditioners with multiple heads can be installed in at least nine rooms, with only one outdoor unit, and allowing for an individual temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter time The annual operating cost would be $272.34.

Reduced Split System Operating Costs

It doesn’t take much to cut down on your operating costs by using the Split System. Depending on the model that you purchase, and it’s respective star rating will determine how much you can save annually. It is important to look beyond the initial cost to the way you make use of your Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer increases the running cost by around 10%.
• Utilize the economy setting in the event that your split system is equipped with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat out by closing the curtains and exterior blinds in the morning. Close doors and windows to areas that are cooling when you have the split unit running.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors or windows and let the cool air circulate.
• Insulate your home to keep cool summer air out and keep the heat in during winter.
• Wear clothes that are appropriate for the weather conditions.

Why Select A Split System?

Air conditioning units mounted in wall are the most frequently used residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less energy use) and produces relatively less noise when used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted Split AC systems are the best cost-effective option for a single room or apartment because they are relatively inexpensive to purchase (depending on how many indoor units you will require) and don’t need duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is installed in, so each room is able to have different temperatures.

Air Quality

Many HVAC systems that are split come with air filtering and humidity control functions which control the amount dust and humidity inside the room. This allows for sensitive customers (children, elderly, asthmatic or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser, which gives you the comfort of having the best Air conditioner (in terms of output and physical limitations) to a specific space.

Split System FAQ

Is a split system similar to an air conditioner?

It is true that Split System has an air-conditioning system. There are various types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each of these systems operates with refrigerant and electricity under the same principle but they are different in terms of installation.

How long will it take to install a split system air conditioner?

In general, a single AC split installation should take 3-6 hours. However, the exact amount of time could vary based on various factors like below;

• Location and size of both indoor and outdoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority cases in the event that your air conditioner is more than 10 years and has evident issues with the A/C there’s a great likelihood that it is less expensive to replace it than to repair it.

In order to help you make the best decision, it is best to consult with the staff at ComfyHome to give you an honest and accurate assessment of the condition of your AC.

What size of split system air conditioning will I require?

A typical measurements ratio is multiply the room area by a factor of 0.15 to get the needed power of the measurement unit in kilowatts.

For a room area that is 40 sqm, you’ll have a Split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 square meter room spaces.

The size of the Split system’s air conditioning requirements can be dependent on other factors such as the room insulation, size of the room, and’ position.

For a precise assessment of the Split unit size, we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general the air conditioner is constructed to last for 10-20 years, on average. However, it is contingent on a variety of things like the manufacturer of the air conditioner as well as the quality of the installation, routine service history and more…

It is vital to check the maintenance of your Split System Air Conditioner on a regular basis to prolong lifetime and enhance effectiveness.

When should I wash my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5 to 15 percentage.

Aspendale Gas Heating Services

• Evaporative Cooling Repair Aspendale
• Carbon Monoxide Testing Aspendale
• Aspendale
• Gas Appliance Servicing & Repair Aspendale
• Gas Heating Aspendale
• Vulcan Ducted Gas Heating Servicing & Repair Aspendale
• Gas Heating Installation Aspendale
• Gas Heating Repairs Aspendale
• Gas Log Fire Service & Repairs Aspendale
• Gas Heating Service Aspendale
• Gas Hot Water System Installation & Repairs Aspendale
• Braemar Ducted Gas Heating Servicing & Repair Aspendale
• Ducted Gas Heating Servicing & Repair Aspendale
• Brivis Ducted Gas Heating Servicing & Repair Aspendale
• Gas Space Heater Repair Aspendale

What Types of Systems We Service & Repair

Each brand and style of heating comes with its specific operation and maintenance needs Our experienced technicians have the insight and expertise to provide first rate services to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance with a focus on all models and types of heating systems. We are proud of our quick response time and commitment to quality, efficiency and reliability.

We service and maintain all leading brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re personable and friendly
• A Team of Experienced and Licenced Professionals
• Get a Quote With No obligation

Our Promise To You

We at Gas Heating Melbourne we understand the frustration of not having hot water. It’s a situation we believe no one should suffer through. This is why we place top priority for hot water emergencies. All of our plumbers are friendly and trustworthy We will be able to help with any emergency.

We are proud of our customer service and it is our belief that the minor things matter most.

We pride ourselves on our great customer service, Here’s why our clients love us:

• We will always be there when we promise to be there.
• Our experts will give you a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always making sure we clean up after our own mess.

Our company Gas Heating Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services or what we provide, we are here to help.