Split System Installation Viewbank

Split System Installation in Viewbank

There’s nothing better than coming home from a scorching day of 40 degrees and turning on your split system air conditioning, and in a matter of seconds, the house and family members are cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running at their best, they need to be maintained and serviced in a professional manner by qualified experts. Gas Heating Melbourne offers experienced technicians who know your split system air-conditioners from top to bottom. They specialise in all makes and models providing you with confidence that we can get the job done to professional standards.

We offer a wide range of services that include the following:

• Split System Installation Viewbank
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to handle all kinds of work. If you’re in search of Split System Installation Viewbank services then contact Local Heating and Cooling Professionals Viewbank today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning get their name because half of that system (condenser) is located outside of the house while the other half (fan coil) is installed inside. While cooling, warm air in the room is drawn in from the fan coil and eliminated, resulting in cool air flowing back into the house. While reverse cycle allows for the heat pump to operate in reverse in order to provide warmth during colder days.

Split air conditioning systems can be placed in rooms, areas or multiple rooms joined by copper piping into an outdoor unit (condenser). Multi-head split air conditioning systems can be set up for as many as nine rooms with only one outdoor unit, and allowing for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter months The annual operating cost would be $272.34.

Reducing Costs of Split Systems Operating Costs

It’s not hard to reduce your running costs by using a Split System. Based on the model you buy, as well as its star rating will determine how much you can save annually. Beyond the initial cost and how you make use of Your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Each degree less in summer will increase the running costs by approximately 10%..
• Choose the economy option if your split system has one. Also, you should regularly check the condition of your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the day. Close windows and doors to areas that are cooled when it is split on.
• If the split system is switched off , and the cooler outside, it is recommended to open the doors or windows and let cool air inside.
• Insulate your home to keep the warm summer days out and cool inside during winter.
• Dress to suit the weather.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most frequently used residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year since it keeps the temperature constant, cuts costs (less consumption of energy) and produces relatively less sound when it is used. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall-mounted wall mounted split AC systems are the most economical option for a single room or apartment as they are comparatively inexpensive to purchase (depending on the amount of indoor units you’ll need) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, thus each room is able to have different temperature.

Air Quality

A lot of Split air conditioners come with air filtering functions and humidity control that regulate the amount of dust and humidity that can be found in a room. This provides those with sensitive skin (children and elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, that in turn provides you with satisfaction of having the ideal air conditioner (in terms of output and physical constraints) for a particular room.

Split System FAQ

Are split systems similar to an air conditioner?

Yes, Split System is an air conditioning system. But, the different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates by using refrigerant and electricity. They all operate on the same principle but they are different in terms of installation.

How long will it take to install a split-system air conditioner?

In general, a single split system air conditioning installation will last between 3 and 6 hours. But, the exact amount of time may vary based on a variety of factors, such as below;

• Location and size of both outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation when your air conditioner is more than 10 years old and there are obvious issues with your AC There is a high possibility that it will be more affordable to replace than repair.

To help you make the right decision, it is best to contact the experts at ComfyHome to give you an honest evaluation of the state of your air conditioner.

What size split system air conditioning will I require?

A common measuring ratio will multiple the space by a ratio of 0.15 to get the needed power of the unit in kilowatt.

For a room with a size of 40sqm, you should need a Split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is ideal for 10-20 sqm rooms spaces.

However, the size of the Split system’s air conditioning requirements is also affected by other variables such as the insulation of the room, the size of the room, and’ position.

For a precise assessment of the Split dimension, please contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is designed to last between 10 and 20 years, on an average. But it depends on heaps of things like the brand of the A/C and the quality of the installation, the routine maintenance history etc…

It is crucial to maintain your Split System Air Conditioner on a regular basis to extend its life and increase efficiency.

Do I need to clean my air conditioner’s filter?

As per Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of the system, and ultimately decrease your energy use by 5%-15%.

Viewbank Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Viewbank
• Gas Hot Water System Installation & Repairs Viewbank
• Gas Space Heater Repair Viewbank
• Carbon Monoxide Testing Viewbank
• Viewbank
• Gas Heating Service Viewbank
• Brivis Ducted Gas Heating Servicing & Repair Viewbank
• Evaporative Cooling Repair Viewbank
• Vulcan Ducted Gas Heating Servicing & Repair Viewbank
• Gas Appliance Servicing & Repair Viewbank
• Gas Heating Viewbank
• Gas Heating Installation Viewbank
• Gas Heating Repairs Viewbank
• Gas Log Fire Service & Repairs Viewbank
• Ducted Gas Heating Servicing & Repair Viewbank

What Types of Systems We Service & Repair

Each brand and style of heating requires its specific operation and maintenance needs Our skilled technicians are knowledgeable and experience to offer excellent services on all types of heating equipment, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance, specialising in all styles and brands of heating equipment. We pride ourselves on having a fast response time and dedication to efficiency, excellence and reliability.

We can service and maintain all top brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Quote With No Costs

Our Promise To You

We at Gas Heating Melbourne we understand the difficulty of not having hot water and it’s something we don’t think anyone should suffer through. This is why we put such a high priority for hot water emergencies. All of our plumbers are trustworthy and friendly Without a doubt, we will be able to assist you in any situation.

We take pride in our customer service , and it is our firm belief that the minor things matter most.

We take pride in our excellent customer service. here’s why our customers love us:

• We always arrive when we say we will.
• Our experts will give you a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice before we even begin the job.
• Always cleaning up after us.

We at Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If you have questions about our services and the products we offer.