Split System Installation Port Melbourne

Split System Install in Port Melbourne

There’s nothing better than coming home on a hot 40 degree day switching on your split system air conditioning, and in a matter of minutes your house and your family will be cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running to their maximum they must be maintained and maintained at a high level by qualified professionals. Gas Heating Melbourne offers experienced technicians that know your split system air-conditioners both inside and outside. They specialize in all models and models offering you peace of mind that we are able to complete the task in a professional manner.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Port Melbourne
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to perform all kinds of tasks. If you are looking for split system installation Port Melbourne services then contact Local Heating and Cooling Professionals Port Melbourne today and talk with one of our helpful team members.

How Do Split Systems Work?

Split air conditioning systems have the name because of one half of the system (condenser) located outside the home, while the other part (fan coil) is inside. In cooling, warm air inside the room is absorbed through the fan coil, and then eliminated, resulting in cooling air returning to the home. In reverse mode, it allows heating pumps to operate in reverse, providing heating in cold weather.

Split air conditioning systems are installed to specific rooms, zones or rooms connected by copper piping connecting to the outdoor unit (condenser). Multi-head split air conditioning systems can be installed for at least nine rooms using just one outdoor unit and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of our recommended brands for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter months The annual operating cost is $272.34.

Reducing Split System Running Costs

It’s not hard to reduce your running costs by using the Split System. Depending on the model you purchaseand its star rating will determine how you’ll save each year. But looking beyond the initial cost and how you will use your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Any degree lower than that will increase your running costs by approximately 10%..
• Make use of the economy setting when your split has one and regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and external blinds during the daytime. Close the doors and windows of areas that are being cooled while it is split on.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors as well as windows in order to let the cool air circulate.
• Insulate your residence to prevent the heat out in summer and in during winter.
• Dress appropriately for the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are among the most commonly used air conditioning systems for homes because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year since it keeps a constant temperature, saves costs (less energy consumption) and produces a lesser amount of noise when it is used. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC system are most economical option for a single room or apartment since they are inexpensive to purchase (depending on the amount of indoor units you require) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is installed within, and each space may have different temperatures.

Air Quality

A lot of Split air conditioners come with air filtering functions and humidity control that control the amount of dust and humidity in the space. This gives sensitive customers (children or elderly, asthmatic or allergic consumers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser which provides the convenience of having the perfect Air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Is a split system similar to the air conditioning?

It is true that Split System can be described as an air conditioner system. However, there are different kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All of them operate with refrigerant and electricity under the same principles, however they are different in terms of how they are installed.

What is the time frame to set up a split system air conditioner?

Generally speaking the typical split-system air conditioner installation should be completed in 3-6 hours. However, the exact amount of time could vary based on many factors such as below:

• Location and size of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation in the event that your air conditioner is over > 10-years-old and you have noticeable issues with your A/C, there is a good chance that it could be cheaper to replace then repair.

For help in making the right decision, it is best to contact the experts at ComfyHome for an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioning do I need?

The standard measurements ratio is multiply the size of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a room with a size that is 40 sqm, you’ll have a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is ideal for 10-20 sqm rooms spaces.

However, the amount of the Split system’s air conditioning requirements will also be affected by other variables such as the room insulation, number of occupants and residents’ position.

To make an accurate determination of the necessary Split units size we suggest you call us for a more detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is built to last from 10-20 years, on an average. However, this is contingent upon a myriad of things like the brand of the A/C as well as the quality of the installation, the routine maintenance history and so on…

It is vital to check the maintenance of the Split System air conditioner regularly for a longer life span and to increase efficiency.

How often should I wash my air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy usage by 5 to 15 15%.

Port Melbourne Gas Heating Services

• Port Melbourne
• Gas Heating Service Port Melbourne
• Gas Appliance Servicing & Repair Port Melbourne
• Gas Space Heater Repair Port Melbourne
• Braemar Ducted Gas Heating Servicing & Repair Port Melbourne
• Evaporative Cooling Repair Port Melbourne
• Gas Heating Repairs Port Melbourne
• Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Hot Water System Installation & Repairs Port Melbourne
• Gas Heating Port Melbourne
• Gas Log Fire Service & Repairs Port Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Heating Installation Port Melbourne
• Carbon Monoxide Testing Port Melbourne
• Brivis Ducted Gas Heating Servicing & Repair Port Melbourne

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own operation and maintenance Our skilled technicians are knowledgeable and expertise to provide top-quality services for all heating systems, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems and specialize in all types and models of heating systems. We pride ourselves on having a rapid response time as well as a commitment to efficiency, excellence and reliability.

We are able to maintain and service the majority of leading brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Request a Quote with No Costs

Our Promise To You

We at Gas Heating Melbourne we understand the difficulty of not having hot water and it’s something that we would never want anyone to need to go through. This is why we place the highest priority on emergencies involving hot water. Our plumbers are friendly and trustworthy We can assist you in all situations.

We pride ourselves on our service to customers and it is our firm belief that the tiny things are the most important.

We take pride in our exceptional customer service. this is why our customers love us:

• We will always be there when we promise to be there.
• Our techs will give you a their number when they’re thirty minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always cleaning up after ourselves.

The staff at Gas Heating Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have some questions about our services or what we provide, we are here to help.