Split System Installation Officer

Split System Install in Officer

There’s nothing better than arriving to your home on a hot day of 40 degrees and switching on your split system air-conditioning and within a matter of minutes , your home and your family are cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. But , just like all heaters or coolers, to ensure they are operating to their maximum they must be maintained and serviced in a professional manner by qualified professionals. Gas Heating Melbourne offers experienced technicians who are familiar with split system air-conditioners both inside and outside. They specialize in all models and models providing you with peace of mind that we are able to complete the task to professional standards.

We offer a variety of services, which include the following:

• Split System Installation Officer
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and fully trained to perform all kinds of tasks. If you are looking for split system installation Officer services then contact Local Heating and Cooling Professionals Officer today and talk with one of our helpful team members.

How Do Split Systems Operate?

Air conditioning splits get their name because half of this system (condenser) being outside the home, while the other part (fan coil) is installed inside. While cooling, warm air in the room is brought in from the fan coil before being taken out, resulting into cool air flowing back into the house. Reverse cycle allows the heat pump to operate in reverse, providing heating during cold days.

Air conditioning split systems can be installed in individual rooms, zones or rooms connected by copper piping connecting to the outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted for at least nine rooms and just one outdoor unit as well as allowing individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter months, the annual running cost is $272.34.

The reduction of split system Operating Costs

It’s not hard to lower your running expenses with the Split System. Depending on the model you purchaseand its star rating will determine how much you can save annually. It is important to look beyond the initial price to how you make use of the Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Any degree lower than that increases the running cost by 10%..
• Utilize the economy setting if your split system has one and regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains as well as external blinds during the day. Close all doors and windows in areas that are cooled when the split system is on.
• When the split system has been turned off and the cooler is outside, you can open doors or windows and let cool air flow in.
• Insulate your property to help keep the heat out in summer and in the winter months.
• Wear clothes that are appropriate for the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are the most widely used air conditioning systems for homes because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and creates a lot less sound when it is employed. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall mounted wall mounted split AC system are most affordable option for a one room or apartment because they are relatively inexpensive to buy (depending on how many indoor units you require) and they don’t require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed within, and each space can have a distinct temperature.

Air Quality

Many Split air conditioners feature air filters and humidity control mechanisms which regulate the amount of dust and humidity inside the room. This gives sensitive customers (children, elderly, asthmatic or allergic users) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser, which in turn gives you satisfaction of having the perfect Air conditioner (in terms of physical and output constraints) for the room you are in.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are different kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate with refrigerant and electricity under the same principle but they are different in term of installation.

What is the time frame to set up a split system air conditioner?

In general, a single split system air conditioning installation should last between 3 and 6 hours. But, the exact amount of time could vary based on a variety of factors, such as below;

• Size and location of both indoor and outdoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation, if your A/C is more than 10 years old and there are evident issues with the A/C, there is a good possibility that it will be more affordable to replace than repair.

To help you make the right choice, it is best to speak with the team at ComfyHome to give you an honest opinion on the condition of your air conditioner.

What size split system air conditioning will I require?

A standard measure ratio would be to multiply the area of the room by a ratio of 0.15 to calculate the necessary power of the unit in Kilowatts.

For a room area that is 40 sqm, you’ll require a split system air conditioning unit that is 6 kW. A unit with a cooling capacity of 2.5kW is perfect for rooms with 10-20 square meters. spaces.

However, the size of the Split system’s required air conditioning is also affected by other variables like the insulation of the room, the size of the room, and’ location.

For an accurate assessment of the required Split unit size, please call us for a more detailed analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general an air conditioner is built to last 10-20 years in the average. However, it is contingent on a variety of elements, such as the brand of the A/C, quality of the installation, the routine maintenance history etc…

It is crucial to maintain the Split System air conditioner frequently for a longer life span and to increase effectiveness.

When should I clean my air conditioner’s filter?

In accordance with Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks in order to boost the efficiency of the system and reduce your energy consumption by 5%-15 15%.

Officer Gas Heating Services

• Gas Heating Officer
• Gas Heating Installation Officer
• Evaporative Cooling Repair Officer
• Gas Heating Repairs Officer
• Ducted Gas Heating Servicing & Repair Officer
• Gas Appliance Servicing & Repair Officer
• Vulcan Ducted Gas Heating Servicing & Repair Officer
• Gas Heating Service Officer
• Gas Hot Water System Installation & Repairs Officer
• Gas Space Heater Repair Officer
• Officer
• Carbon Monoxide Testing Officer
• Gas Log Fire Service & Repairs Officer
• Braemar Ducted Gas Heating Servicing & Repair Officer
• Brivis Ducted Gas Heating Servicing & Repair Officer

What Types of Systems We Service & Repair

Each type and brand of heating requires its specific operation and maintenance needs Our skilled technicians are equipped with the expertise and experience to offer the best service for all heating systems, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance, specialising in all styles and brands of heating systems. We take pride in a fast response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the majority of major brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re Personable & Friendly
• Professionally trained and licensed team
• Request a Quote with No Obligation

Our Promise To You

At Gas Heating Melbourne we understand the difficulty of not having hot water. It’s a situation we believe no one should need to go through. This is the reason we place top priority on emergencies involving hot water. Our plumbers are trustworthy and friendly, without a doubt we are able to assist you in any situation.

We pride ourselves on our service to customers and it is our belief that the minor things matter most.

We are proud of our exceptional customer service. and here’s the reason our customers are so happy with us:

• We always show up when we say we will.
• Our staff will give you the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we even begin the job.
• Always cleaning up after us.

We at Gas Heating Melbourne offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services and the products we can provide.