Split System Installation Mount Martha

Split System Installation in Mount Martha

There’s nothing better than coming home to a 40-degree day, flipping on your split-system air-conditioning and within a matter of minutes , your home and your family will be cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running optimally, they need to be maintained and maintained to the highest standard by qualified experts. Gas Heating Melbourne offers experienced technicians that know your split system air-conditioners inside and out. They specialize in all brands and models and give you peace of mind that we are able to complete the task to a professional standard.

We provide a variety of services that comprise the following:

• Split System Installation Mount Martha
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed to perform all kinds of work. If you’re searching for split system installation Mount Martha services then contact Local Heating and Cooling Professionals Mount Martha today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning are the name because of one half of it (condenser) being outside the house while the other portion (fan coil) is inside. When it cools, warm air from inside the room is absorbed by the fan coil, and then removed, resulting in cool air being recirculated back into the house. Reverse cycle allows the heat pump to operate in reverse in order to provide warmth during colder days.

Split air conditioning systems are fitted to individual rooms, zones or rooms linked by copper pipe into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for up to nine rooms and only one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter time and the annual running costs would be measured at $272.34.

Reducing split system Running Costs

It doesn’t take much to cut down on your operating costs by using a Split System. Depending on the model that you purchase, and it’s respective star rating will determine just how much you can save annually. But looking beyond the initial cost to the way you utilize your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer will increase the running costs by about 10%..
• Choose the economy option If your split system comes with one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat out by closing the curtains and exterior blinds during the daytime. Close all doors and windows in areas that are cooling when your split systems are operating.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors or windows and let cool air flow in.
• Insulate your house to block the summer heat out and the cold inside during winter.
• Dress according to the weather conditions.

Why Choose A Split System?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout all seasons since it ensures an even temperature, helps save costs (less energy use) and creates a lot less sound when it is it is used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC system are best affordable option for a one room or apartment since they are inexpensive to purchase (depending on the amount of indoor units you will require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is located in, so each room may have distinct temperature.

Air Quality

A lot of split air conditioning systems feature air filtering functions and humidity control which control the amount dust and humidity in a room. This provides those with sensitive skin (children, elderly, asthmatic or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser, which provides the peace of mind that you have the best cooling system (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Yes, Split System includes an air-conditioning unit. But, the different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate with refrigerant and electricity under the same principles, however they are different in term of installation.

What is the time frame to install a split-system air conditioner?

In general the typical split system air conditioning installation can take 3-6 hours. But, the exact amount of time will depend on many factors such as below;

• Size and location of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In the majority cases the air conditioner is over > 10 years and has apparent issues with your air conditioner, there is a good chance that it could be more affordable to replace than repair.

In order to help you make the right decision, it is best to speak with the team at ComfyHome to give you an honest and accurate assessment of the condition of your AC.

What size of split system air conditioning do I need?

A typical measurement ratio is to multiply the size of the room by a ratio of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a room area of 40 square metres, you’ll need a Split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10 -20 sqm room areas.

The size of the Split system’s air conditioning will also be affected by other variables such as the insulation in the room, the number of occupants and residents’ place of residence.

To make an accurate determination of the required Split Unit size we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years in the an average. But this depends on a lot of factors such as the model of the AC it is installed on, the quality of its installation, routine service history and so on…

It is essential to service Your Split System AC on a regular basis for a longer life span and to increase efficiency.

When should I clean my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly suggested that you should wash your air conditioner’s filters every two weeks to improve the efficiency of the system and reduce energy consumption by 5 to 15%.

Mount Martha Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Mount Martha
• Gas Heating Installation Mount Martha
• Ducted Gas Heating Servicing & Repair Mount Martha
• Gas Heating Repairs Mount Martha
• Brivis Ducted Gas Heating Servicing & Repair Mount Martha
• Mount Martha
• Gas Hot Water System Installation & Repairs Mount Martha
• Gas Log Fire Service & Repairs Mount Martha
• Gas Space Heater Repair Mount Martha
• Gas Heating Mount Martha
• Gas Heating Service Mount Martha
• Carbon Monoxide Testing Mount Martha
• Gas Appliance Servicing & Repair Mount Martha
• Evaporative Cooling Repair Mount Martha
• Vulcan Ducted Gas Heating Servicing & Repair Mount Martha

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own operation and maintenance Our experienced technicians are equipped with the expertise and know how to provide excellent services for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems with a focus on all models and types of heating systems. We pride ourselves on having a rapid response time and dedication to excellence, efficiency and reliability.

We service and maintain the majority of top brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

At Gas Heating Melbourne we understand the discomfort of not having hot water. This is something we don’t think anyone should be forced to endure. That’s why we give an emphasis on emergencies involving hot water. All of our plumbers are courteous and reliable, without a doubt we are able to assist you in any situation.

We pride ourselves on our customer service , and it is our conviction that the small things count the most.

We take pride in our great customer service, this is why our customers appreciate us:

• We always arrive when we promise to be there.
• Our staff will give you their number when they’re thirty minutes away.
• Competitive pricing upfront and expert advice before we even begin the job.
• Always getting our hands clean after us.

Our company Gas Heating Melbourne offer emergency and maintenance services for plumbing, heating, and electrical. If you have questions about our services, and the services we provide, we are here to help.