Split System Installation Montrose

Split System Installation in Montrose

There’s nothing better than coming home from a scorching 40-degree day, activating your split system air conditioning and in just a couple of seconds, the house and family members are cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. Like all heaters and coolers to make sure they’re running to their maximum they must be maintained and serviced in a professional manner by experienced professionals. Gas Heating Melbourne offers experienced technicians that know your split system air conditioners inside and out. They specialize in all brands and models offering you confidence that we will finish the job to professional standards.

We provide a variety of services that include the following:

• Split System Installation Montrose
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to handle all kinds of work. If you’re searching for Split System Installation Montrose services then contact Local Heating and Cooling Professionals Montrose today and talk with one of our friendly team members.

How Do Split Systems Operate?

The split systems of air conditioning are their name because half of that system (condenser) being located outside the home, while the other half (fan coil) is inside. When cooling, the warm air in the room is drawn in through the fan coil and removed, resulting in cool air flowing back into the home. Reverse cycle allows your heat pump run in reverse to provide heat on cold winter days.

Split air conditioning systems can be fitted to individual rooms, areas or multiple rooms connected by copper piping with an outside unit (condenser). Multiple-headed split-air conditioning units are able to be fitted for as many as nine rooms using only one outdoor unit, and allowing for an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter seasons and the annual running costs would be measured at $272.34.

Lowering Split System Running Costs

It’s not hard to cut down on your operating costs with the Split System. Depending on the model you purchase, and the star rating will determine just how you’ll save each year. But looking beyond the initial cost to the way you will use it Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer increases the running cost by 10%..
• Make use of the economy setting if your split system has one. Also, you should regularly check the condition of your air conditioning.
• Keep the sun’s heat away by closing curtains and external blinds during the daytime. Close doors and windows to areas that are cooled when it is split on.
• When the split system is switched off and its cooler outside, open the doors and windows to let cool air in.
• Insulate your house to block summer heat out and the cold inside during winter.
• Dress appropriately for the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year since it keeps an even temperature, helps save costs (less energy consumption) and creates a lot less sound when it is used. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted split AC systems are the best economical option for a single room, apartment or small house because they are relatively inexpensive to buy (depending on the number of indoor units you require) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the area it is placed in, which means that each room is able to have different temperature.

Air Quality

Many HVAC systems that are split include air filtering and humidity control functions which regulate the amount of dust and humidity within the space. This allows for sensitive customers (children older, asthmatic, or allergic people) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which gives you the comfort of having the best cooling system (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same thing as an air conditioner?

Sure, Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate with refrigerant and electricity under the same principle but they are different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general for a single split air conditioning system installation is expected to be completed in 3-6 hours. However, the exact amount of time can vary based upon a number of variables, including below;

• The size and location of both outdoor and indoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In the majority cases in the event that your air conditioner is at least 10 years and there are noticeable issues with your A/C, there is a good chance that it could be cheaper to replace rather than fix.

For help in making the right choice, it is best to talk to the experts at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size split system air conditioning do I need?

A typical measure ratio would be to multiply the area of the room by a ratio of 0.15 in order to determine the power of the measurement unit in kilowatts.

If you have a room size of 40sqm, you should need a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is perfect for 10 -20 sqm room areas.

The size of the Split system’s air conditioning requirements can be dependent on other factors such as the room insulation, number of occupants and residents’ position.

To make an accurate determination of the required Split Unit size please contact us for a detailed analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general air conditioners are designed to last between 10 and 20 years, on average. However, this is contingent upon a myriad of things like the brand of the A/C, quality of the installation, routine service history and so on…

It is vital to check the maintenance of Your Split System AC regularly to extend its lifespan and improve effectiveness.

When should I wash the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every two weeks in order to boost the efficiency of your system and possibly reduce your energy usage by 5%-15%.

Montrose Gas Heating Services

• Gas Heating Service Montrose
• Vulcan Ducted Gas Heating Servicing & Repair Montrose
• Montrose
• Gas Heating Montrose
• Braemar Ducted Gas Heating Servicing & Repair Montrose
• Gas Log Fire Service & Repairs Montrose
• Gas Space Heater Repair Montrose
• Gas Heating Installation Montrose
• Ducted Gas Heating Servicing & Repair Montrose
• Gas Hot Water System Installation & Repairs Montrose
• Carbon Monoxide Testing Montrose
• Brivis Ducted Gas Heating Servicing & Repair Montrose
• Gas Appliance Servicing & Repair Montrose
• Gas Heating Repairs Montrose
• Evaporative Cooling Repair Montrose

What Types of Systems We Service & Repair

Each brand and style of heating comes with its own operation and maintenance Our experienced technicians have the knowledge and know how to provide top-quality services to all systems of heating for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance and specialize in all types and models of heating systems. We are proud of our fast response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service the majority of leading brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Free Quote and No obligation

Our Promise To You

At Gas Heating Melbourne we understand the discomfort of not having hot water, and it’s something we don’t think anyone should be forced to endure. This is the reason we place top priority on emergencies involving hot water. All of our experienced plumbers are trustworthy and friendly We can assist you in any circumstance.

We pride ourselves on the quality of our customer service. It is our belief that the minor things matter most.

We are proud of our great customer service, here’s why our customers appreciate us:

• We always arrive when we promise to be there.
• Our techs will give you a a call when they are 30 minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always taking care to clean up after us.

Our company Gas Heating Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services or what we can offer, please contact us.