Split System Installation Lilydale

Split System Installation in Lilydale

There’s nothing better than coming home from a scorching day of 40 degrees and turning on your split system air-conditioning and within a matter of minutes your house and your family will be cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. But , just like all heaters or coolers, to ensure they are operating optimally they must be checked and maintained at a high level by skilled professionals. Gas Heating Melbourne offers experienced technicians who know split system air-conditioners in and out. They are experts in all makes and models of these units providing you with assurance that they will finish the job to professional standards.

We provide a variety of services that include the following:

• Split System Installation Lilydale
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained for all sorts of tasks. If you’re looking for [keywords lower] Lilydale services then contact Local Heating and Cooling Professionals Lilydale today and talk with one of our helpful team members.

How Do Split Systems Function?

The split systems of air conditioning earn their name due to half that system (condenser) located outside the house while the other half (fan coil) is inside. When cooling, the warm air inside the room is taken in through the fan coil before being is then removed, which results in cool air being recirculated back into the home. The reverse cycle permits the heat pump to run in reverse, providing heating in cold weather.

Systems for split air conditioners are installed to specific rooms, zones or rooms joined by copper piping to an outdoor unit (condenser). Systems with multi-head splits can be installed for more than nine rooms, with only one outdoor unit, as well as allowing the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter seasons, the annual running cost will be $272.34.

The reduction of split system Operating Costs

It’s not hard to cut down on your operating costs by using the Split System. The model you purchase, and the star rating will determine just how much you can save annually. However looking beyond the initial cost and how you use Your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C to cool. Any degree lower than that will increase your running costs by around 10%.
• Utilize the economy setting when your split has one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat away by closing curtains and external blinds during the day. Close windows and doors to areas that are being cooled while your split systems are running.
• If the split system is shut off and the cooler outside, it is recommended to open the doors as well as windows in order to let the cool air circulate.
• Insulate your house to block the cool summer air out and keep the heat inside during winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Wall mounted split air conditioning systems are among the most commonly used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through all seasons since it ensures an even temperature, helps save costs (less energy use) and produces relatively less sound when it is utilized. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted wall mounted split AC system are most cost-effective option for a single room apartment or small house as they are relatively cheap to purchase (depending on how many indoor units you need) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is placed in, so each room is able to have distinct temperature.

Air Quality

Many HVAC systems that are split come with air filtering functions and humidity control which regulate the amount of dust and humidity that can be found in a room. This gives sensitive customers (children and elderly, asthmatic or allergic people) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser that in turn provides you with the peace of mind that you have the perfect AC (in terms of output and physical constraints) for a specific room.

Split System FAQ

Are split systems the same thing as an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates using refrigerant and electricity, based on the same principle but they are different in term of installation.

How long does it take to set up a split system air conditioner?

In general an individual split system air conditioning installation is expected to last between 3 and 6 hours. The exact length of time will depend on many factors such as below;

• Location and size of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases the A/C is more than 10 years of age and you notice noticeable issues with your A/C there’s a good possibility that it will be more affordable to replace than repair.

For help in making the right choice, it is best to talk to the experts at ComfyHome to get an honest evaluation of the condition of your AC.

What size of split system air conditioner will I require?

A typical measuring ratio will multiply the area of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a room with a size that is 40 sqm, you’ll have a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10-20 square meter room areas.

The size of the Split system’s required air conditioning is also affected by other variables like the insulation of the room, the number of occupants and residents’ position.

For a precise assessment of the necessary Split units size we suggest you call us for a more detailed analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general an air conditioner is designed to last between 10 and 20 years on an average. But it depends on heaps of factors such as the model of the AC and the quality of the installation, the routine maintenance history and so on…

It is crucial to maintain the Split System air conditioner frequently for a longer life span and to increase efficiency.

What is the best frequency to wash my air conditioner’s filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately decrease your energy use by 5%-15 percent.

Lilydale Gas Heating Services

• Gas Log Fire Service & Repairs Lilydale
• Vulcan Ducted Gas Heating Servicing & Repair Lilydale
• Gas Heating Installation Lilydale
• Gas Heating Repairs Lilydale
• Gas Heating Lilydale
• Braemar Ducted Gas Heating Servicing & Repair Lilydale
• Carbon Monoxide Testing Lilydale
• Gas Space Heater Repair Lilydale
• Gas Appliance Servicing & Repair Lilydale
• Gas Heating Service Lilydale
• Ducted Gas Heating Servicing & Repair Lilydale
• Evaporative Cooling Repair Lilydale
• Lilydale
• Gas Hot Water System Installation & Repairs Lilydale
• Brivis Ducted Gas Heating Servicing & Repair Lilydale

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own operation and maintenance Our skilled technicians have the insight and know how to provide top-quality services across all kinds of heaters, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems, specialising in all styles and models of heating systems. We are proud of our fast response time and dedication to efficiency, excellence and reliability.

We are able to service and maintain the leading brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Get a Quote With No Obligation

Our Promise To You

We at Gas Heating Melbourne we understand the discomfort of not having hot water and it’s something that we would never want anyone to need to go through. This is the reason we place the highest priority on emergencies involving hot water. All of our plumbers are trustworthy and friendly We are able to assist with any emergency.

We are proud of our service to customers and it is our belief that even the small things count the most.

We are proud of our great customer service, here’s why our customers are so happy with us:

• We always show up when we declare that we will.
• Our experts will give you the number to call them when they are 30 minutes away.
• Upfront competitive pricing and advice prior to the start of the project.
• Always making sure we clean up after ourselves.

We at Gas Heating Melbourne offer emergency and maintenance services in plumbing, heating, and electrical. If you have some questions about our services or what we can provide.