Split System Installation Highett

Split System Installation in Highett

There’s nothing better than arriving home on a hot day of 40 degrees and flipping on your split-system air-conditioning and within a matter of minutes the house and your family will be cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. Like all heaters and coolers to make sure they’re running optimally, they need to be serviced and maintained in a professional manner by experienced professionals. Gas Heating Melbourne offers experienced technicians who know your split system air conditioners inside and out. They specialise in all makes and models of these units and give you confidence that we will finish the job to professional standards.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Highett
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and fully trained to complete all types of work. If you’re searching for split system installation Highett services then contact Local Heating and Cooling Professionals Highett today and talk with one of our helpful team members.

How Do Split Systems Operate?

Systems for split air conditioners have the name because of one half of this system (condenser) being located outside the house , while the other portion (fan coil) is located inside. When it cools, warm air inside the room is taken in through the fan coil and eliminated, resulting in cool air flowing back into the home. Reverse cycle allows your heat pump run in reverse in order to provide warmth during colder days.

Air conditioning split systems can be placed in rooms, zones or rooms linked by copper pipe into an outdoor unit (condenser). Systems with multi-head splits can be set up in as many as nine rooms with just one outdoor unit and allowing for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter time The annual operating cost is $272.34.

Reducing split system Running Costs

It’s not difficult to reduce your running costs with a Split System. Depending on the model you purchase, and the star rating, you will be able to determine how much you will save each year. Beyond the initial cost to how you will use your Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower during summer will increase your running costs by 10%..
• Choose the economy option when your split has one and regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close the doors and windows of areas that are being cooled while it is split operating.
• When the split system has been shut off and the cooler outside, open the doors or windows and let cool air flow in.
• Insulate your house to block warm summer days out and cool in the winter months.
• Dress appropriately for the weather.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most commonly used air conditioning systems for homes because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year since it keeps an even temperature, helps save costs (less energy consumption) and creates a lot less noise when it is used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted Split AC systems are the most economical option for a single room apartment, small home or even a studio as they are comparatively inexpensive to purchase (depending on the number of indoor units you will require) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the area it is placed in, so each room may have different temperature.

Air Quality

Many AC splits include air filtering functions and humidity control which control the amount dust and humidity in a room. This gives sensitive customers (children, elderly, asthmatic or allergic consumers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to a single outdoor condenser that in turn provides you with the comfort of having the ideal cooling system (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Are split systems the same as an air conditioner?

Absolutely, Split System has an air-conditioning system. However, there are different kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general the typical split-system air conditioner installation will be completed in 3-6 hours. But, the exact amount of time may vary based on a variety of factors, such as below:

• Dimensions and position of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation the A/C is more than 10 years of age and has apparent issues with your air conditioner, there is a good chance that it’s cheaper to replace rather than fix.

To assist you in making the best decision It is recommended to consult with the staff at ComfyHome to get an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioner will I require?

A typical measurements ratio is multiply the room area by a ratio of 0.15 to get the needed power of the unit in kilowatt.

For a room area that is 40 sqm, you’ll need a Split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10-20 square meter room areas.

The size of the Split system’s air conditioning requirements will also be affected by other factors like how well the insulation is in place, the quantity of residents and’ position.

For an accurate assessment of the required Split units size we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years in the an average. However, this is contingent upon a myriad of factors such as the manufacturer of the air conditioner and the quality of the installation, routine maintenance history and so on…

It is important to service your Split System Air Conditioner frequently to prolong lifetime and enhance efficiency.

How often should I wash my air conditioner’s filter?

Based on Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system and decrease your energy use by 5 to 15 percentage.

Highett Gas Heating Services

• Ducted Gas Heating Servicing & Repair Highett
• Brivis Ducted Gas Heating Servicing & Repair Highett
• Gas Space Heater Repair Highett
• Carbon Monoxide Testing Highett
• Vulcan Ducted Gas Heating Servicing & Repair Highett
• Gas Heating Repairs Highett
• Braemar Ducted Gas Heating Servicing & Repair Highett
• Gas Log Fire Service & Repairs Highett
• Highett
• Evaporative Cooling Repair Highett
• Gas Heating Highett
• Gas Appliance Servicing & Repair Highett
• Gas Hot Water System Installation & Repairs Highett
• Gas Heating Service Highett
• Gas Heating Installation Highett

What Types of Systems We Service & Repair

Every brand and type of heating requires its own operation and maintenance Our experienced technicians have the insight and know how to provide first rate services for all heating systems, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We are proud of our quick response time and commitment to efficiency, excellence and reliability.

We service and maintain the majority of major brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

At Gas Heating Melbourne we understand the inconvenience of not having any hot water. It’s a situation we believe no one should have to experience. This is the reason we place top priority on hot water emergencies. All of our plumbers are reliable and friendly and without doubt, we can assist you in any situation.

We are proud of our customer service and it is our firm belief that the small things count the most.

We pride ourselves on our exceptional customer service. this is why our customers appreciate us:

• We always show up when tell you we will.
• Our staff will give you a call when they are 30 minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always taking care to clean up after our own mess.

At Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have questions about our services, and the services we can offer, please contact us.