Split System Installation Greensborough

Split System Install in Greensborough

There’s nothing better than arriving home from a scorching 40 degree day turning on your split system air conditioning and in a matter of seconds, the house and family members are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. However, like all heaters and coolers to keep them running at their best they should be checked and maintained in a professional manner by qualified professionals. Gas Heating Melbourne offers experienced technicians who are familiar with split system air conditioners inside and out. They specialise in all makes and models of these units providing you with assurance that they are able to complete the task to professional standards.

We provide a variety of services that include the following:

• Split System Installation Greensborough
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed to complete all types of jobs. If you’re looking for Split System Installation Greensborough services then contact Local Heating and Cooling Professionals Greensborough today and talk with one of our friendly team members.

How Do Split Systems Operate?

Air conditioning splits earn their name due to half that system (condenser) located outside the house , while the second half (fan coil) is installed inside. While cooling, warm air in the room is taken in via the fan coil and taken out, resulting into cool air flowing back into the house. Reverse cycle allows heating pumps to run in reverse to provide heat on cold winter days.

Air conditioning split systems are installed in individual rooms, areas or multiple rooms joined by copper piping to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for as many as nine rooms with only one outdoor unit, and allowing for the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter seasons The annual operating cost would be measured at $272.34.

Lowering Split System Running Costs

It’s not difficult to reduce your running costs with the Split System. Depending on the model you purchase, and the star rating will determine how much you can save annually. Beyond the initial cost to the way you utilize your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer will raise the cost of running by about 10%..
• Use the economy setting If your split system comes with one. You should also regularly maintain your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the daytime. Close doors and windows to areas being cooled when it is split on.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors along with windows, allowing cool air flow in.
• Insulate your house to block heat out in summer and inside in winter.
• Dress according to the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most commonly used residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains the temperature constant, cuts costs (less consumption of energy) and creates a lot less noise when utilized. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted divided AC systems are the best affordable option for a one room apartment or small house because they are relatively inexpensive to buy (depending on the number of indoor units you require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed in, so each room can have a different temperatures.

Air Quality

A lot of AC splits feature air filtering and humidity control functions that regulate the amount of dust and humidity inside the room. This gives sensitive customers (children and elderly, asthmatic or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser which in turn gives you the convenience of having the perfect Air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems the same thing as the air conditioning?

Yes, Split System is an air conditioning system. But, the different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate by using refrigerant and electricity. They all operate on the same principle, but are different in terms.

How long does it take to install a split system air conditioner?

In general an individual AC split installation is expected to take 3-6 hours. The exact length of time will depend upon a number of variables, including below:

• Size and location of both outdoor and indoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation when your A/C is more than 10 years old and there are noticeable issues with your A/C There is a high likelihood that it is more affordable to replace than repair.

To help you make the right decision It is recommended to contact the experts at ComfyHome for an honest assessment on the condition of your AC.

What size split system air conditioning do I need?

The standard measurement ratio is to multiply the area of the room by a ratio of 0.15 to get the needed power of the unit in kilowatt.

For a room area that is 40 sqm, you’ll require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is ideal for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s air conditioning requirements will also be affected by other variables like the insulation in the room, the amount of people residing there and’ location.

To get an accurate estimate of the needed Split units size please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years on average. But it depends on heaps of factors such as the model of the AC it is installed on, the quality of its installation, the routine maintenance history and more…

It is important to service your split system air conditioner on a regular basis to prolong lifetime and enhance efficiency.

Do I need to clean my air conditioner’s filter?

According to Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system and reduce your energy consumption by 5 to 15 15%.

Greensborough Gas Heating Services

• Gas Heating Service Greensborough
• Evaporative Cooling Repair Greensborough
• Greensborough
• Carbon Monoxide Testing Greensborough
• Gas Appliance Servicing & Repair Greensborough
• Braemar Ducted Gas Heating Servicing & Repair Greensborough
• Gas Log Fire Service & Repairs Greensborough
• Gas Heating Installation Greensborough
• Gas Space Heater Repair Greensborough
• Gas Heating Repairs Greensborough
• Brivis Ducted Gas Heating Servicing & Repair Greensborough
• Gas Heating Greensborough
• Vulcan Ducted Gas Heating Servicing & Repair Greensborough
• Ducted Gas Heating Servicing & Repair Greensborough

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own operation and maintenance Our experienced technicians are knowledgeable and expertise to provide first rate services to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance that specialize in all kinds and brands of heating systems. We take pride in a quick response time and commitment to excellence, efficiency and reliability.

We are able to service and maintain the majority of top brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Request a Quote with No Costs

Our Promise To You

At Gas Heating Melbourne we understand the difficulty of not having hot water, and it’s something we don’t think anyone should suffer through. This is why we put top priority on hot water emergencies. All of our plumbers are courteous and reliable We will be able to help you in all situations.

We pride ourselves on our customer service and it is our belief that even the little things matter the most.

We take pride in our excellent customer service. this is why our customers appreciate us:

• We always show up when we say we will.
• Our techs will give you a their number when they’re 30 minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always taking care to clean up after our own mess.

Our company Gas Heating Melbourne offer emergency and maintenance services in electrical, plumbing and heating. If at any time you have some questions about our services, and the services we can offer, please contact us.