Split System Installation Frankston

Split System Install in Frankston

There’s nothing better than arriving home from a scorching 40 degree day switching on your split system air conditioning, and in a matter of seconds, the house and your family is cool.

Split system air-conditioning provides this flexibility, which makes them difficult to beat. But , just like all heaters or coolers, to ensure they are operating to their maximum they must be maintained and maintained at a high level by experienced professionals. Gas Heating Melbourne offers experienced technicians who know split system air-conditioners inside and out. They specialise in all makes and models of these units giving you the confidence that we can get the job done to professional standards.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Frankston
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and fully trained to perform all kinds of tasks. If you are looking for split system installation in Frankston services then contact Local Heating and Cooling Professionals Frankston today and talk with one of our helpful team members.

How Do Split Systems Operate?

Air conditioning splits are their name due to half the system (condenser) being outside the house while the other part (fan coil) is installed inside. While cooling, warm air from inside the room is absorbed from the fan coil, and then is then removed, which results in cooling air returning to the home. While reverse cycle allows for the heat pump to operate in reverse, providing heating on cold winter days.

Systems for split air conditioners can be fitted to individual rooms, areas or even multiple rooms connected by copper piping to an outdoor unit (condenser). Multi-head split air conditioning systems can be used in more than nine rooms with only one outdoor unit, permitting separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the winter and summer periods The annual operating cost would be measured at $272.34.

Reducing split system Running Costs

It’s not hard to reduce your running costs by using the Split System. The model you purchase, and the star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost and how you make use of Your Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer will increase the running costs by approximately 10%..
• Use the economy setting when your split has one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close all doors and windows in areas that are being cooled while you have the split unit operating.
• When the split system is switched off and its cooler outside, open the doors and windows to let the cool air in.
• Insulate your home to keep cool summer air out and keep the heat inside in winter.
• Wear clothes that are appropriate for the weather.

Why Select Split Systems?

Split air conditioners mounted on walls are among the most commonly used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year because it maintains an even temperature, helps save costs (less energy consumption) and generates less noise when employed. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted divided AC models are most cost-effective option for a single room, apartment or small house as they are relatively cheap to buy (depending on the amount of indoor units you will require) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, which means that each room is able to have different temperature.

Air Quality

Many split air conditioning systems include air filtering functions and humidity control which control the amount dust and humidity that can be found in the space. This provides those with sensitive skin (children, elderly, asthmatic or allergic customers) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to a single outdoor condenser that in turn provides you with the convenience of having the perfect AC (in terms of output and physical constraints) to a specific space.

Split System FAQ

Are split systems the same as the air conditioning?

It is true that Split System has an air-conditioning system. But, the different types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate with refrigerant and electricity under the same principles, however they are different in terms.

What is the time frame to set up a split system air conditioner?

In general the typical split-system air conditioner installation can take between 3-6 hours. However, the exact amount of time will depend on a variety of factors, such as below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In most situation when your air conditioner is over > 10 years and there are apparent issues with your air conditioner there’s a good possibility that it will be cheaper to replace rather than fix.

In order to help you make the right decision for your needs, consult with the staff at ComfyHome to provide you with an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioning will I require?

A common measurement ratio is to multiply the area of the room by a ratio of 0.15 in order to determine the power of the unit in kilowatt.

For a space that is 40 sqm, you’ll have a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is suitable for 10-20 square meter room areas.

The size of the Split system’s air conditioning requirements will also be affected by other factors like the insulation of the room, the number of occupants and residents’ position.

For a precise assessment of the needed Split Unit size we suggest you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years in the an average. But it depends on heaps of factors such as the manufacturer of the air conditioner and the quality of the installation, routine maintenance history and so on…

It is vital to check the maintenance of Your Split System AC often for a longer life span and to increase effectiveness.

When should I clean my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy consumption by 5 to 15 percentage.

Frankston Gas Heating Services

• Gas Log Fire Service & Repairs Frankston
• Evaporative Cooling Repair Frankston
• Gas Heating Installation Frankston
• Frankston
• Ducted Gas Heating Servicing & Repair Frankston
• Gas Heating Service Frankston
• Brivis Ducted Gas Heating Servicing & Repair Frankston
• Gas Heating Repairs Frankston
• Gas Heating Frankston
• Gas Space Heater Repair Frankston
• Vulcan Ducted Gas Heating Servicing & Repair Frankston
• Carbon Monoxide Testing Frankston
• Gas Appliance Servicing & Repair Frankston
• Braemar Ducted Gas Heating Servicing & Repair Frankston
• Gas Hot Water System Installation & Repairs Frankston

What Types of Systems We Service & Repair

Each model and brand of heating comes with its own operation and maintenance; our experienced technicians have the knowledge and expertise to provide the best service across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We pride ourselves on having a rapid response time as well as a commitment to excellence, efficiency and reliability.

We can service and maintain the majority of leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• A Team of Experienced and Licenced Professionals
• Get a Quote Without Obligation

Our Promise To You

At Gas Heating Melbourne we understand the inconvenience of not having any hot water. It’s a situation that we would never want anyone to have to experience. This is why we place an emphasis on hot water emergencies. Our experienced plumbers are courteous and reliable Without a doubt, we will be able to assist you in all situations.

We take pride in the quality of our customer service. It is our belief that even the tiny things are the most important.

We are proud of our exceptional customer service. here’s why our customers appreciate us:

• We will always be there when we say we will.
• Our experts will give you their number when they’re 30 minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always getting our hands clean after us.

We at Gas Heating Melbourne offer emergency and maintenance services for plumbing, heating, and electrical. If you have some questions about our services, and the services we can provide.