Split System Installation Dandenong North

Split System Install in Dandenong North

There’s nothing better than arriving to your home on a hot day of 40 degrees and switching on your split system air conditioning, and in a matter of seconds, the house and family members are cool.

Split system air-conditioning offers such versatility, which makes them tough to beat. Like all heaters and coolers to keep them running at their peak they should be checked and maintained to the highest standard by skilled professionals. Gas Heating Melbourne offers experienced technicians who know split system air-conditioners in and out. They specialize in all brands and models and give you confidence that we can get the job done to a professional standard.

We provide a variety of services that comprise the following:

• Split System Installation Dandenong North
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to perform all kinds of jobs. If you’re searching for split system installation in Dandenong North services then contact Local Heating and Cooling Professionals Dandenong North today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Split air conditioning systems have their name because half of the system (condenser) is located outside of the home, while the other half (fan coil) is located inside. While cooling, warm air from inside the room is brought in from the fan coil and is then removed, which results in cool air recirculating back into the home. In reverse mode, it allows that the heating system to operate in reverse in order to provide warmth on cold winter days.

Air conditioning split systems are fitted to individual rooms, zones or rooms joined by copper piping into an outdoor unit (condenser). Multi-head split air conditioning systems can be set up for up to nine rooms using only one outdoor unit as well as allowing separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter seasons, the annual running cost will be $272.34.

The reduction of Split System Operating Costs

It doesn’t take much to save on running expenses by using a Split System. Based on the model you purchase, and the star rating, you will be able to determine how much you’ll save per year. Beyond the initial cost and how you will use Your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will raise the cost of running by approximately 10%..
• Make use of the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close windows and doors to areas that are cooling when you have the split unit running.
• When the split system is shut off and the cooler outside, it is recommended to open the doors or windows and let cool air flow in.
• Insulate your home to keep the cool summer air out and keep the heat inside during winter.
• Wear clothes that are appropriate for the weather.

Why Select Split Systems?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year as it maintains an even temperature, helps save costs (less energy use) and generates less sound when it is it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted Split AC systems are the most cost-effective option for a single room, apartment or small house because they are relatively inexpensive to purchase (depending on how many indoor units you require) and they don’t require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, which means that each room could have different temperature.

Air Quality

A lot of AC splits come with air filtering and humidity control functions that regulate the amount of dust and humidity in the space. This allows for sensitive customers (children and elderly, asthmatic or allergic people) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which provides satisfaction of having the most suitable Air conditioner (in terms of output and physical constraints) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

Sure, Split System can be described as an air conditioner system. However, there are different types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate with refrigerant and electricity under the same principle, but are different in terms of how they are installed.

How long does it take to set up a split system air conditioner?

In general, a single split air conditioning system installation should last between 3 and 6 hours. The exact length of time will depend on a variety of factors, such as below;

• Location and size of both the outdoor and indoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation when your air conditioner is more than 10 years of age and there are obvious issues with your AC there’s a great chance that it’s less expensive to replace it than to repair it.

In order to help you make the best decision To make the right choice, talk to the experts at ComfyHome to give you an honest opinion on the condition of your air conditioner.

What size split system air conditioning will I require?

A typical measuring ratio will multiple the space by a ratio of 0.15 to calculate the necessary power of the measurement unit in kilowatts.

If you have a room size that is 40 sqm, you’ll need a Split air conditioning system of 6 kW. An air conditioning unit of 2.5kW is suitable for 10-20 square meter room areas.

However, the amount of the Split system’s air conditioning can also be affected by other variables such as the room insulation, number of occupants and residents’ place of residence.

For an accurate assessment of the Split Unit size we suggest you contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general an air conditioner is constructed to last for 10-20 years on an average. But it depends on heaps of factors such as the model of the AC and the quality of the installation, regular service history, and so on…

It is crucial to maintain your split system air conditioner regularly for a longer life span and to increase effectiveness.

How often should I clean my air conditioner air filter?

According to Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percent.

Dandenong North Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Dandenong North
• Carbon Monoxide Testing Dandenong North
• Gas Heating Service Dandenong North
• Ducted Gas Heating Servicing & Repair Dandenong North
• Gas Heating Dandenong North
• Gas Heating Repairs Dandenong North
• Gas Log Fire Service & Repairs Dandenong North
• Vulcan Ducted Gas Heating Servicing & Repair Dandenong North
• Gas Appliance Servicing & Repair Dandenong North
• Gas Heating Installation Dandenong North
• Brivis Ducted Gas Heating Servicing & Repair Dandenong North
• Gas Space Heater Repair Dandenong North
• Gas Hot Water System Installation & Repairs Dandenong North
• Dandenong North
• Evaporative Cooling Repair Dandenong North

What Types of Systems We Service & Repair

Every brand and type of heating requires its own maintenance and operation Our experienced technicians are equipped with the expertise and expertise to provide first rate services for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience with heating repair and maintenance with a focus on all models and types of heating systems. We pride ourselves on having a fast response time and dedication to excellence, efficiency , and reliability.

We service and maintain the majority of top brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Quote Without Obligation

Our Promise To You

At Gas Heating Melbourne we understand the frustration of not having hot water. This is something that we would never want anyone to have to experience. That’s why we give the highest priority on emergencies with hot water. All of our plumbers are trustworthy and friendly and without doubt, we will be able to help you in all situations.

We pride ourselves on our service to customers and it is our conviction that the minor things matter most.

We are proud of our great customer service, here’s why our customers love us:

• We will always be there when we say we will.
• Our staff will give you an appointment when they are 30 minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always getting our hands clean after our own mess.

We at Gas Heating Melbourne offer emergency and maintenance services for plumbing, electrical, and heating. If you have questions about our services and the products we provide, we are here to help.