Split System Installation Box Hill

Split System Install in Box Hill

There’s nothing more satisfying than coming home from a scorching day and turning on your split system air-conditioning and within a matter of seconds, the house and your family is cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. Like all heaters and coolers to make sure they’re running to their maximum they must be checked and maintained to the highest standard by qualified experts. Gas Heating Melbourne offers experienced technicians that know your split system air conditioners inside and out. They specialize in all models and models of these units and give you confidence that we are able to complete the task at a professional level.

We provide a range of services that comprise the following:

• Split System Installation Box Hill
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to handle all kinds of tasks. If you’re in search of split system installation in Box Hill services then contact Local Heating and Cooling Professionals Box Hill today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because half of that system (condenser) located outside the house while the other portion (fan coil) is installed inside. In cooling, warm air inside the room is absorbed by the fan coil before being taken out, resulting into cooling air returning to the home. The reverse cycle permits your heat pump run in reverse to provide heating during cold days.

Air conditioning split systems are installed in individual rooms, zones or rooms joined by copper piping connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for at least nine rooms and only one outdoor unit, and allow for separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter months and the annual running costs is $272.34.

Reduced the Split System Running Costs

It’s easy to cut down on your operating costs with a Split System. Based on the model you purchaseand its star rating, you will be able to determine how much you’ll save per year. It is important to look beyond the initial cost and how you use it Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer increases the running cost by 10%..
• Utilize the economy setting If your split system comes with one. Ensure that you regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close all doors and windows in areas being cooled when your split systems are on.
• When the split system is turned off and the cooler is outside, open the doors along with windows, allowing the cool air in.
• Insulate your property to help keep cool summer air out and keep the heat inside in winter.
• Dress to suit the weather conditions.

Why Choose A Split System?

The wall mounted air conditioning system is the most widely used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year as it maintains the temperature constant, cuts costs (less consumption of energy) and produces relatively less sound when it is utilized. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC system are most economical option for a single room apartment or small house as they are comparatively inexpensive to purchase (depending on the amount of indoor units you require) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is situated in, so each room can have a various temperature.

Air Quality

Many HVAC systems that are split have air filtering and humidity control features which regulate the amount of dust and humidity inside the space. This allows for sensitive customers (children or elderly, asthmatic or allergic people) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser that in turn provides you with satisfaction of having the perfect Air conditioner (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. There are various types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates with refrigerant and electricity under the same principle but they are different in terms of installation.

How long will it take to install a split-system air conditioner?

In general, a single split system air conditioning installation should take 3-6 hours. However, the exact amount of time may vary based on many factors such as below;

• Location and size of both outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In most situation, if your A/C is more than 10 years of age and there are noticeable issues with your A/C There is a high chance that it could be cheaper to replace rather than fix.

To assist you in making the right decision It is recommended to talk to the experts at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size split system air conditioning do I need?

The standard measure ratio would be to multiple the room area by a factor of 0.15 to obtain the required power of the unit in Kilowatts.

For a room area of 40sqm, you should have a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system air conditioning required can be affected by other factors like the insulation of the room, the size of the room, and’ locations.

For a precise assessment of the Split Unit size we recommend you call us for a more detailed analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general an air conditioner is built to last 10-20 years in the average. However, this is contingent upon a myriad of variables, including the model of the AC it is installed on, the quality of its installation, routine maintenance history etc…

It is vital to check the maintenance of the Split System air conditioner often to extend its life and increase effectiveness.

When should I clean my air conditioner air filter?

As per Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percent.

Box Hill Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Box Hill
• Brivis Ducted Gas Heating Servicing & Repair Box Hill
• Gas Heating Box Hill
• Box Hill
• Gas Log Fire Service & Repairs Box Hill
• Ducted Gas Heating Servicing & Repair Box Hill
• Carbon Monoxide Testing Box Hill
• Gas Space Heater Repair Box Hill
• Evaporative Cooling Repair Box Hill
• Gas Heating Installation Box Hill
• Gas Heating Service Box Hill
• Vulcan Ducted Gas Heating Servicing & Repair Box Hill
• Gas Appliance Servicing & Repair Box Hill
• Gas Heating Repairs Box Hill
• Gas Hot Water System Installation & Repairs Box Hill

What Types of Systems We Service & Repair

Each type and brand of heating system has its own operation and maintenance Our skilled technicians are knowledgeable and experience to offer top-quality services for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance and specialize in all types and types of heating systems. We are proud of our rapid response time as well as a commitment to efficiency, excellence and reliability.

We are able to maintain and service the major brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

We at Gas Heating Melbourne we understand the difficulty of not having hot water. It’s a situation we believe no one should be forced to endure. That’s why we give an emphasis on hot water emergencies. All of our experienced plumbers are trustworthy and friendly Without a doubt, we can assist you in all situations.

We take pride in our customer service , and it is our conviction that the little things matter the most.

We pride ourselves on our exceptional customer service. Here’s why our clients appreciate us:

• We always show up when we say we will.
• Our staff will give you the number to call them when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always cleaning up after ourselves.

The staff at Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical, and heating. If you have any questions regarding our services and what we offer.