Split System Installation Albert Park

Split System Installation in Albert Park

There’s nothing better than coming to your home on a hot 40-degree day, turning on your split system air-conditioning and within a matter of minutes your house and family members are cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running to their maximum they should be maintained and serviced to the highest standard by qualified experts. Gas Heating Melbourne offers experienced technicians that know your split system air conditioners from top to bottom. They specialise in all makes and models and give you peace of mind that we will complete the task at a professional level.

We provide a variety of services that include the following:

• Split System Installation Albert Park
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to handle all kinds of work. If you’re in search of split system installation Albert Park services then contact Local Heating and Cooling Professionals Albert Park today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Air conditioning splits earn their name because of half the system (condenser) being located outside the home, while the other half (fan coil) is installed inside. In cooling, hot air that is inside the room is absorbed through the fan coil, and then taken out, resulting into cooling air returning to the home. While reverse cycle allows for that the heating system to operate in reverse to provide heat during colder days.

The split system of air conditioning are placed in rooms, zones or rooms linked by copper pipe to an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for at least nine rooms with only one outdoor unit, permitting the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter seasons, the annual running cost will be $272.34.

Lowering Costs of Split Systems Operating Costs

It doesn’t take much to lower your running expenses by using the Split System. Depending on the model you purchase, and it’s respective star rating will determine just how much you can save annually. It is important to look beyond the initial price to how you will use Your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C to cool. Each degree less in summer increases the running cost by around 10%.
• Choose the economy option in the event that your split system is equipped with one. Ensure that you regularly service your air cooling system.
• Keep the sun’s heat away by closing curtains and external blinds during the daytime. Close the doors and windows of areas that are cooled when you have the split unit in operation.
• When the split system is turned off and the cooler is outside, it is recommended to open the doors or windows and let the cool air circulate.
• Insulate your property to help keep the heat out in summer and inside during winter.
• Dress to suit the weather.

Why Choose Split Systems?

The wall mounted air conditioning system is the most widely owned by homeowners who own a residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less energy use) and creates a lot less sound when it is it is used. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC system are best economical option for a single room apartment or small house as they are relatively cheap to buy (depending on the number of indoor units you require) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is placed within, and each space could have different temperature.

Air Quality

A lot of HVAC systems that are split have air filtering and humidity control features that control the amount of dust and humidity inside the space. This gives sensitive customers (children, elderly, asthmatic or allergic users) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser which gives you the convenience of having the best air conditioner (in terms of output and physical constraints) for a specific room.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

It is true that Split System is an air conditioning system. However, there are many types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates on electricity & refrigerant under the same principle, but are different in terms of installation.

How long will it take to install a split-system air conditioner?

In general, a single split system air conditioning installation should last between 3 and 6 hours. But, the exact amount of time could vary based on a variety of factors, such as below;

• Size and location of both outdoor and indoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations when your air conditioner is at least 10-years-old and you have noticeable issues with your A/C there’s a good likelihood that it is less expensive to replace it than to repair it.

To help you make the best decision for your needs, consult with the staff at ComfyHome to provide you with an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

A standard measurement ratio is to multiple the area of the room by a ratio of 0.15 to get the needed power of the unit in Kilowatts.

If you have a room size of 40 square meters, you will require a split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is perfect for 10-20 sqm rooms spaces.

However, the size of the Split system’s air conditioning requirements will also be affected by other variables like the room insulation, quantity of residents and’ locations.

To make an accurate determination of the Split Unit size we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is designed to last between 10 and 20 years on an average. But this depends on a lot of things like the brand of the A/C, quality of the installation, regular service history, etc…

It is crucial to maintain the Split System air conditioner frequently to prolong lifetime and enhance efficiency.

How often should I clean the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy consumption by 5%-15 percentage.

Albert Park Gas Heating Services

• Evaporative Cooling Repair Albert Park
• Gas Appliance Servicing & Repair Albert Park
• Gas Heating Installation Albert Park
• Gas Space Heater Repair Albert Park
• Gas Heating Service Albert Park
• Gas Hot Water System Installation & Repairs Albert Park
• Brivis Ducted Gas Heating Servicing & Repair Albert Park
• Braemar Ducted Gas Heating Servicing & Repair Albert Park
• Carbon Monoxide Testing Albert Park
• Gas Heating Repairs Albert Park
• Ducted Gas Heating Servicing & Repair Albert Park
• Albert Park
• Gas Heating Albert Park
• Gas Log Fire Service & Repairs Albert Park
• Vulcan Ducted Gas Heating Servicing & Repair Albert Park

What Types of Systems We Service & Repair

Each type and brand of heating has it’s individual operation and maintenance requirements; our experienced technicians have the insight and experience to offer first rate services on all types of heating equipment including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance with a focus on all models and types of heating systems. We take pride in a fast response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the majority of top brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Get a Quote Without Obligation

Our Promise To You

We at Gas Heating Melbourne we understand the inconvenience of not having any hot water and it’s something that we would never want anyone to suffer through. That’s why we give top priority on emergencies with hot water. All of our experienced plumbers are reliable and friendly We will be able to help you in all situations.

We take pride in our customer service , and it is our firm belief that the tiny things are the most important.

We pride ourselves on our outstanding customer service. here’s why our customers love us:

• We will always be there when we declare that we will.
• Our staff will give you the number to call them when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always taking care to clean up after us.

We at Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If you have questions about our services and the products we can offer, please contact us.